Hanging pictures can really make a house a home. It also can be extremely difficult depending upon what type of material you are wanting to hang your picture on. In order to help you out we found this article with helpful step-by-step directions on how to hang pictures on a variety of surfaces. We hope it helps!

————
If you need Condo association dryer vent cleaning services, then Dryer Vents Plus is your #1 choice! Call Jeremy Leake today at 225-612-7752 to schedule your 100% Free, No Obligation Quote!
————

From the article:

Whether you’ve got plaster, brick, drywall, concrete, stucco or tile, this guide will help you hang anything and (nearly) everything on your walls hassle free.

Brick
Supplies: Brick Spring Clip, Measuring Tape, and Screw Driver
Steps:
1. Measure size of the wall prior to purchasing a spring clip to determine the size you will need.
2. Place the bottom of the clip at the base of the brick.
3. Push clip against top of brick until it locks in.
4. Hang picture and ensure it will hold weight prior to letting go of the frame.

Tile
Supplies: Cooling Oil, Anchor, Screw, Hammer, Painter???s Tape, Carbide or Diamond Tip Drill Bit, and Power Drill
Steps:
1. Measure and plot point on wall using painter???s tape.
2. Attach chosen drill bit and soak in cooling oil for approximately 5-10 seconds.
3. Start slowly drilling into painter???s tape on tile. Slowly apply light pressure and increase speed until you complete drilling the desired hole length.
4. Hammer in the anchor and drill in screw. Hang picture

————–
Looking to design your home? Then checkout this article about principles for interior design that could be of interest to you.
————–

Read the entire article here: http://www.sheknows.com/home-and-gardening/articles/1054127/how-to-hang-things-on-any-wall